In metallurgy, stainless steel also called as inox steel or inoxidizable steel. It is a steel material alloyed with high content of chromium and nickel, where
Minimum Cr at 10.5%
Minimum Ni at 8%
Maximum Carbon at 1.5%
As we know, stainless steel flange is impressed by it's great corrosion resistance, which because of the elements of Chromium, and as Cr increased, better resistant performances will be gained.
On the other hand, additions of Molybdenum will increase corrosion resistance in reducing acids and against pitting attack in chloride solutions. So there are different grades of stainless steel with varying Cr and Mo compositions to suit the environment with required to be alloyed.
Advantages:
Resistant to corrosion and staining
Low maintenance
Bright familiar luster
Steel Strength
| Ngalan sa Produkto: Stainless Steel Flange | |
| Matang | Slip On, Weld Neck, Socket Weld, Plate, Blind, Threaded, Reducing, Lap Joint, Spectacle etc. |
| Grado | F304, F304L, F309S, F310S, F316, F316L, F316Ti, F317, F317L, F321, F347, S30815 / 253MA, S31254 / 254SMO, N08904 / 904L, F51, F53, F55 etc. |
| Sulukdan | ASTM A182 / 182M, ASME B16.5, ASTM A240, ASME B16.47-A, ASME B16.47-B, JIS B2220 etc. |
| Kadak-an | 1/2"- 48" |
| Pagpamugos | 150-2500 LBS |
| Pag-atubang | Gipataas ang Nawong (RF), Flat Face / Full Face (FF), Ring Joint Face (RTJ) |
| Pagputos | Mga kaso nga crates / Plywood o ingon sa hangyo sa mga kostumer. |
| Pag-aplay | Ang transportasyon sa Langis ug Gas, LNG, petrochemical, nukleyar nga gahum, paghimo sa barko, pulp ug papel, pagtambal sa hugaw, konstruksyon, medisina, mga pagkaon, dekorasyon ug uban pa. |
| Ubang mga Sumbanan | AWWA C207, BS4504, SABS 1123, TABLE D, GOST 12820 / 1-80, AS 2129 etc. |
Mga lahi sa Flanges:
| Mga Flanges nga Bulag nga Wala’y Asero | Ang stainless steel nga nagpaminus sa mga flange | Mga Flanges nga Type nga Wala'y Kinatawhan nga Steel |
| Mga Flanges nga stainless steel spectacle | Ang mga stainless steel Weld Neck Flanges | Mga Flanges nga High Steel High Hub |
| Mga Wala’y Sulud nga Bakal nga Sulud sa Sulud | Ang stainless steel Lap Joint Flanges | Ang stainless Steel Long Long Neck Flanges |
| Mga stainless Flip nga Wala'y Sulud nga Bakal nga Sulud | Mga stainless Flange Socket Weld Flanges | Mga Flanges nga stainless steel orifice |
Many different types of stainless steel flanges can be incorporated into a piping system. Stainless steel flanges are highly resistant to rust, are much stronger and can out perform carbon steel flanges and provide much more corrosion resistance than your aluminum or steel flanges.
ASME (American Society of Mechanical Engineers) flanges are engineered to meet certain standards. These standards are specified by the ASME and by the American National Standards Institute (ANSI). There are certain specifications in all flanges, each depending on the certain type of flange. This similarity ensures consistency with the same types of flanges used and replaced now and in the future.
